Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 25)

PNEG-739 42" - 48" Platforms & Safety Cages 25
48'' Head Service Platform
2
Attach HSP484047 and HSP484048 handrail at-
tachment angles to the post next to the head
bearing angle on the discharge end of the lower
head (Figure 2-5) Field drill the hole in each head
bearing angle and use 3/8" x 1" hex bolts sup-
plied.
Attach the two service platform support angles,
HSP484038, to rear of head angles and to the
support channel through the holes provided in
the center decking using 3/8" x 1" hex bolts. (See
Figure 2-5)
Handrail Angles
FIGURE 2-5
Service Platform
Support Angle
HSP484048 Right Attachment Angle for Handrail
HSP484047 Left Attachment Angle for Handrail