Grain Systems Bucket Elevtors, Conveyors, Series II Sweeps PNEG-739 - Manual (Page 27)

PNEG-739 42" - 48" Platforms & Safety Cages 27
48'' Head Service Platform
2
Attach the grab bar attachment angles
(HSP484035) to the grab bar mounting angle
using 3/8" x 1" hex bolts. Then fasten the grab
bar weldment to the attachment angles and the
head bearing angle using 3/8" x 1" hex bolts.
Recheck assembly to be sure all hardware is
secure.
Grab Bar Installation
FIGURE 2-7
GSB30120 Latch
Assembly
HSP484033 Grab
Bar Weldment
HSP484034 Grab
Bar Mounting Angle
HSP484035 Grab
Bar Attachment Angle
Head Bearing Angle
NOTE: Only applicable for 38" - 72"
wide bucket elevators.