Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1445 - Manual (Page 22)

22 PNEG-1445 6", 8", 10" and 12" Custom Augers
4. Assembly
Standard Assembly without Bearings (Continued)
5. Insert the intake shaft into the flight and connect with proper grade 8 bolt and stover nut.
(See Chart below and Figure 4P.)
Figure 4P
Assemblies with Internal Bearings
1. Slide connecting band onto main auger tube, and attach connecting stub to main auger flight using
the assigned hardware. (See Chart below and Figure 4Q on Page 23.)
Flight Hardware
6" 3/8"-16 x 2" Grade 8 Hex Bolts
8" 7/16"-14 x 3" Grade 8 Hex Bolts
10" 1/2"-13 x 3-1/2" Grade 8 Hex Bolts
12" 5/8"-11 x 4" Grade 8 Hex Bolts
Flight Hardware
6" 3/8"-16 x 2" Grade 8 Hex Bolts
8" 7/16"-14 x 3" Grade 8 Hex Bolts
10" 1/2"-13 x 3-1/2" Grade 8 Hex Bolts
12" 5/8"-11 x 4" Grade 8 Hex Bolts
( See Chart above for bolt sizes.)