Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1445 - Manual (Page 25)

4. Assembly
PNEG-1445 6", 8", 10" and 12" Custom Augers 25
Assemblies with Internal Bearings (Continued)
5. With hanger bearing secured bolt connecting band to tubes using the 3/8"-16 x 1-1/2" hex bolts
and attach access cover using included nylock nuts. (See Figure 4U.)
Figure 4U
Assembling the Intake Guard for all 6", 8", 10" and 12" Custom Augers
Installing the Intake Guard
NOTE: For utility augers only.
1. Slide the intake guard onto the auger tube aligning the intake shaft with the bronze bushing.
(See Figure 4V.)
Figure 4V