Grain Systems Custom, Utility and Bulk Tank Augers PNEG-1445 - Manual (Page 24)

24 PNEG-1445 6", 8", 10" and 12" Custom Augers
4. Assembly
Assemblies with Internal Bearings (Continued)
3. With flight sections bolted together slide extension tube flush against main auger tube.
(See Figure 4S.)
Figure 4S
4. With tube sections pressed flush against each other slide connecting band over the tubes aligning
the holes. Reach through the access hole and align hanger bearing with the bolt hole. Attach the
hanger bearing to the tube using assigned hardware.
(See Chart below and Figure 4T.)
Figure 4T
Hanger Bearing Bolt
8" 5/8"-11 x 1-3/4" Grade 8 Bolt
10" 5/8"-11 x 1-3/4" Grade 8 Bolt
12" 3/4"-10 x 2" Grade 8 Bolt
( See Chart above for bolt sizes.)