Moog Music Minimoog Voyager XL - Manual (Page 46)

Page 48
Voyager XL User’s Manual - PANEL Mode
Page 49
Voyager XL User’s Manual - PANEL Mode
T.S. REDUCTION:
T.S. REDUCTION (Touch Surface Reduction) thins the number of MIDI
CCs sent by the Touch Surface Inputs when more than one is used at a
time. The amount of MIDI data produced by the Touch Surface can be
immense, and can crash some MIDI devices. To make a change in the T.S.
Reduction menu, use the CURSOR to highlight the desired choice and
press ENTER.
REAL PANEL PARAM.:
REAL PANEL PARAM (Real Panel Parameters) is a function that enables
the operation of the Voyager from the actual settings of front panel
controls, rather than preset memory. If you select ‘YES’ the sound
produced when the Voyager is played will be determined by the settings
of the front panel controls. To make a change in this menu, use the
CURSOR to highlight the desired choice and press ENTER.
HEADPHONE VOLUME:
HEADPHONE VOLUME is used to determine whether the stored Head-
phone Volume value is loaded when a new preset becomes active. If this
is off, then this value is determined by the current position of the HEAD-
PHONE VOLUME control. To make a change in the Headphone Volume
menu, use the CURSOR to highlight the desired choice and press ENTER.
HELP/CATEGORY:
The HELP/CATEGORY function allows you to display either a Help
message or the Sound Category of a preset on the bottom line of the
Panel Mode display. Help messages provide operational assistance and
users control options, such as the “Cursor selects Y/N” message shown
at left. The Help message text changes appropriately depending on the
information displayed on the LCD.
Sound Categories are designed to assist in organizing presets for quick identification when auditioning
sounds. This can be especially useful in conjunction with the Voyager Editor software. Sound Category is
a parameter that can be assigned in Edit Mode and saved as a part of a preset. When ‘Category’ (sound
category) is chosen instead of ‘Help Line’, the bottom of the LCD will display the sound category of the
selected preset as shown below. To make a change to the Help/Category function, use the CURSOR
to highlight the desired choice and press ENTER.
“Bright Bass” is one of 32 assignable
sound categories. For a complete list
of all the categories as well as details on
assigning sounds, refer to Edit Mode
section 6.2 - SOUND CATEGORY