Moog Music Minimoog Voyager XL - Manual (Page 62)

Page 64
Voyager XL User’s Manual - EDIT Mode
Page 65
Voyager XL User’s Manual - MASTER Mode
6.4 SAVE PRESET
The SAVE PRESET function allows you to store all of the current front
panel settings and software parameters to one of the available 896
memory locations.
To save a preset, you must specify the bank (A-G) and the memory location (1-128). These parameters
appear on the top of the LCD display as shown, along with two destination parameters (PANEL and EDIT).
The destination parameters PANEL and EDIT call up convenient
default memory locations. When PANEL is selected, the bank and
memory location will default to the current Preset location. For
example if you are editing preset number 2 in bank B, the default
PANEL memory location is preset 2 in bank B as shown.
When EDIT is selected, the bank and memory location defaults to the
last saved location. For example, if the last saved location is G009, the
default EDIT memory location will be G009 as shown. Note also that
the name of the Preset that is stored at the specified memory location
is always displayed, preventing you from accidently overwriting a special
preset.
The CURSOR button is used to move amongst the destination, bank number, and memory location
parameters, and the -1/+1 buttons are used to select the parameter values. When the desired storage
location has been selected, press ENTER. The display will then prompt you for a confirmation (YES or NO).
Use the CURSOR button to select ‘YES’ and press ENTER. The Preset will then be stored at the selected
location. Note that changes made to a preset by MIDI CCs are NOT saved.
MIDI Note ONs can also be used to name Presets. Forty four keys on the Voyager XL keyboard (MIDI
Note numbers 53-96) address all of the available letter, number and punctuation characters as shown below.
The SHIFT key toggles between uppercase and lowercase characters.