Moog Music Minimoog Voyager XL - Manual (Page 47)

Page 48
Voyager XL User’s Manual - PANEL Mode
Page 49
Voyager XL User’s Manual - PANEL Mode
LCD CONTRAST
The LCD CONTRAST function changes the viewable angle of the LCD
display. To change this setting, use the -1/+1 buttons to adjust the contrast
level. The change will immediately take effect (you’ll see the display
contrast change) and the new contrast value will be stored automatically.
OTHER PANEL MODE FUNCTIONS
QUICK SAVE:
If a preset has been edited, then pressing the MASTER switch twice saves the preset to the present location.
SOUND CATEGORY BROWSE:
When Categories are displayed on the LCD, pressing ENTER will advance to the next available sound in the
bank or in the subsequent bank within the same sound category (useful for searching for all lead sounds, bass
sounds, percussion sounds, etc.). Pressing ENTER and CURSOR reverses the direction, going backwards in the
progression of the sounds in that category.
RECEIVE SINGLE PRESET:
This does not appear as an option in the Panel Mode menu, but is used in conjunction with ‘Receive
Presets’ in Master Mode. In Master Mode, make sure SysEx is enabled in ‘Receive Presets’. Once this is
done, a single preset can be received to the current active preset location in Panel Mode. Once a preset is
received in the current active location, it can be auditioned. If you want that preset to become part of the
Voyager’s preset bank, you must save the imported preset. If it is not saved and the current preset number
is changed, the imported preset is wiped from the Voyager’s preset memory buffer.
COMPARE:
Compare is a feature in Panel Mode, linked to the Edit Mode ‘COMPARE TO PRESET’ function. Pressing the
CURSOR activates this function – loading the sound in the Compare buffer, and pressing ENTER returns to
the active preset. To load a Preset into the Panel Compare buffer, go to Edit Mode, select ‘COMPARE TO
PRESET’ and press ENTER. Use the cursor to move to the Preset field. Press PANEL to go back to Panel
mode. Now when you press CURSOR, the preset should show as being loaded into the Compare buffer.
It will remain there until the Compare function is used in Edit Mode.