Moog Music Minimoog Voyager XL - Manual (Page 64)

Page 66
Voyager XL User’s Manual - MASTER Mode
Page 67
Voyager XL User’s Manual - MASTER Mode
LOCAL CONTROL:
The LOCAL CONTROL menu provides Local ON/OFF control of seven
Voyager XL functions: Pitch Bend Wheel (PBwhl), Mod Wheel (Modwhl),
Aftertouch (Press), Panel Knobs (Pots), Panel Switches (Swtch), and Touch
Surface (T.S.). An eighth selection (All), allows you to switch the Local
control of all seven functions at once. To change the status of any Voyager
control function, use the CURSOR to make a selection and press the +1/-
1 buttons to select ON/OFF. When all changes have been made, press
ENTER to enter the changes. To escape at any time without changes, press
MASTER.
When Local Control of any interface is switched OFF, the Voyager XL will
display a ‘Local Controls’ message upon power-up, showing the status of all
controls. To dismiss the message, press any button.
When Local Control of Pots or Switches is set to OFF, and the Voyager
XL is set to display parameter values, the LCD will display a ‘LOCAL OFF’
message when you adjust those controls. For example, if Local Control
of Pots has been switched OFF and you then adjust the Mod Wheel Buss
AMOUNT control (or any other Pot), the LCD will include a ‘LOCAL
OFF’ message on the bottom line of the display as shown.
Here are the Master Mode functions:
MIDI INPUT/OUTPUT:
This function is used to set the Voyager XL MIDI IN and MIDI OUT
channels, and turn the channels ON or OFF. Use the CURSOR to select
the parameter, then use the -1/+1 buttons to change the values.