Asus ESC1000 G2 - Manual (Page 107)

ASUS ESC1000 G2 4-25
CPU Fixed Frequency [300]
This item appears when you set the CPU Voltage Frequency item to [Manual].
Use the <+> and <-> keys to adjust the value. The values range from 300k~500kHz
with a 10k Hz interval.
Do not remove the thermal module when switching to Manual mode. The thermal
conditions should be monitored.
CPU Power Duty Control [T.Probe]
CPU Power Duty Control adjusts current and thermal of every phase component.
[T.Probe]
Maintains thermal balance.
[Extreme] Maintains current balance.
Do not remove the thermal module. The thermal conditions should be monitored.
CPU Power Phase Control [Auto]
Controls current capability and voltage frequency through different modes. Increase phase
number under heavy system loading to get more transient and better thermal performance.
Reduce phase number under light system loading to increase efficiency
[Auto]
Proceeds preset phase control.
[Standard] Proceeds phase control based on CPU Command.
[Optimized] Loads the ASUS optimized phase tuning profile.
[Extreme] Proceeds the full phase mode.
[Manual Adjustment] Allows manual adjustment. Phase number adjusted by current(A)
step.
Manual Adjustment [Regular]
This item appears when you set the CPU Power Phase Control item to [Manual
Adjustment]. Select Ultra Fast for a faster response. The reaction time will be longer
when Regular is selected.
Configuration options: [Ultra Fast] [Fast] [Medium] [Regular]
Do not remove the thermal module when switching to Extreme and Manual mode. The
thermal conditions should be monitored.
DRAM-AB Current Capability [100%]
Setting a higher value brings a wider total power range and extends the overclocking
frequency range simultaneously.
Configuration options: [100%] [110%] [120%] [130%]
DRAM-AB Voltage Frequency [Auto]
This item allows you to adjust the DRAM switching frequency. Assign a fixed high DRAM
frequency to increase O.C range or a lower DRAM frequency for better system stability.
Configuration options: [Auto] [Manual]