Asus ESC1000 G2 - Manual (Page 43)

2-23 ASUS ESC1000 G2
2.9 Cable connections
2.9.1 Motherboard connections
• The bundled system cables are pre-connected before shipment. You do not need to
disconnect these cables unless you will remove pre-installed components to install
additional devices.
• Refer to Chapter 3 for detailed information on the connectors.
Standard cables connected to the motherboard
1. 8-pin 12V power connector (from power supply to motherboard)
2. 24-pin ATX power connector (from power supply to motherboard)
3. System fan connectors (from system fan to motherboard)
4. Front panel USB connector (from motherboard to front I/O board)
5. SATA conectors (from motherboard to SATA backplane)
6. System panel connector (from motherboard to front I/O board)
7. Front panel audio connector (from motherboard to front I/O board)
2
1
3
3
3
4
5
6
7
3
4
3