Asus ESC1000 G2 - Manual (Page 166)

6-12 Chapter 6: Driver installation
3. After the system restarts, a
message appears indicating that
auto-tuning is successful. Click OK
to exit.
Using Extreme Tuning
1. Click Auto Tuning tab > Extreme.
2. Read the warning messages
and click OK to start the auto-
overclocking process.
TurboV automatically overclocks
the CPU and memory, and restarts
the system.
3. After the system has restarted, a
message appears indicating the
current overclocking result. To keep
the result, click Stop.
4. If you did not click Stop in
the previous step, TurboV
automatically starts further system
overclocking and stability test.
Click Stop if you want to cancel the
overclocking process.
TurboV automatically adjusts
and saves the BIOS settings and
restarts the system.