1 installing an expansion card, Installing an expansion card -20 – Asus ESC1000 G2 User Manual
Page 40
Advertising
Chapter 2: Hardware setup
2-20
4.
Remove the metal slot cover opposite
the slot where you wish to install an
expansion card.
a
b
Expansion card lock latches
Expansion card locks
5.
Align the card golden fingers with the
slot, and then press firmly until the card
is completely seated on the slot.
2.8.1
Installing an expansion card
1.
Before installing the expansion card, read the documentation that came with it and
make the necessary hardware settings for the card.
2.
Lay the system on its side on a flat, stable surface.
3.
Push down the expansion card lock latch (step a) and lift up the expansion card lock
(step b), as shown in the right figure.
Advertising