Asus ESC1000 G2 - Manual (Page 22)

Chapter 2: Hardware setup 2-2
2.1 Chassis cover
2.1.1 Removing the side cover
• Ensure that you unplug the power cord before removing the side cover.
• Take extra care when removing the side cover. Keep your fingers from components
inside the chassis that can cause injury, such as the CPU fan, rear fan, and other
sharp-edged parts.
• The images of the workstation shown in this section are for reference purpose only
and may not exactly match the model you purchase.
To remove the side cover:
1. Remove the two screws that secure the
left side cover of the chassis.
2. Slide the side cover for about half an inch
toward the rear until it disengaged from
the chassis. Carefully lift the side cover
and set it aside.
1
1
2