Asus ESC1000 G2 - Manual (Page 117)

ASUS ESC1000 G2 4-35
4.5.3 CPU Power Management Configuration
CPU Power Management Configuration
CPU Ratio Auto
Enhanced Intel SpeedStep Technology Enabled
Turbo Mode Enabled
CPU C1E Auto
CPU C3 Report Auto
CPU C6 Report Auto
CPU C7 Report Auto
Allows user to manually adjust the
maximum non-turbo CPU ratio. The
value will be limited to CPU-based or
factory setting.
CPU Ratio [Auto]
Allows user to manually adjust the maximum non-turbo CPU ratio. The value will be limited to
CPU-based or factory setting.
Use <+> and <-> keys to adjust the ratio. The values range from 12 to 22 with a 1 interval.
(The valid value ranges may vary according to your CPU model.)
[Values 12~20] Presets Enhanced Intel SpeedStep Technology and Turbo Mode to
[Disabled] but can be adjusted.
[Values 21~22] Disallows configuration for Turbo Mode.
Enhanced Intel SpeedStep Technology [Enabled]
Enhanced Intel ® SpeedStep Technology (EIST) allows the system operation to dynamically
adjust processor voltage and cores frequency, which can result in decreased average power
consumption and decreased average heat production.
[Disabled]
The CPU runs at its default speed.
[Enabled] The operating system controls the CPU speed.
Turbo Mode [Enabled]
This automatically allows processor cores to run faster than the base operating frequency if
it’s operating below power, current, and temperature specification limit.
[Disabled]
Disables this function.
[Enabled] Allows processor cores to run faster than marked frequency in specific
condition.
CPU C1E [Auto]
[Disabled] Disables this function.
[Enabled] Enables the C1E support function. This item should be enabled in order to
enable the Enhanced Halt State.
CPU C3 Report [Auto]
Allows you to disable or enable the CPU C3 report to OS.