Asus ESC1000 G2 - Manual (Page 33)

2-13 ASUS ESC1000 G2
2.5 Front panel assembly
Before you can install a 5.25-inch drive, you should first remove the front panel assembly
(front bezel and front panel cover).
2.5.1 Removing the front panel assembly
To remove the front panel assembly:
1. Locate the three hooked tabs on the chassis side rail.
2. Shift the hooked tabs and take off the front bezel.
2.5.2 Reinstalling the front panel assembly
To reinstall the front panel assembly:
1. Hook the other side of the front panel
assembly to the chassis.
2. Swing the front panel assembly and
snap it back into place.