Asus ESC1000 G2 - Manual (Page 124)

4-42 Chapter 4: BIOS setup
Select an optimal setting for Super
IO device.
Back Advanced\ Onboard Devices Configuration\ Serial Port Configuration >
Serial Port Configuration
Serial Port Enabled
Change Settings IO=3F8h; IRQ=4
Restore AC Power Loss [Power Off]
[Power On] The system goes into on state after an AC power loss.
[Power Off] The system goes into off state after an AC power loss.
[Last State] The system goes into either off or on state, whatever the system state was
before the AC power loss.
Power On By Keyboard [Disabled]
[Disabled] Disables the keyboard device from generating a wake event.
Configuration options to Enable keyboard to generate a wake event:
[Space Bar] [Ctrl-Esc] [Power Key]
4.5.8 APM
Main Ai Tweaker Advanced Monitor Boot Tool
Exit
Specify what state to go to when
power is re-applied after a power
failure (G3 state).
Back Advanced\ APM >
UEFI BIOS Utility - Advanced Mode
Restore AC Power Loss Power Off
Power On By Keyboard Disabled
Power On By Mouse Disabled
Power On By PCIE Disabled
Power On By Ring Disabled
Power On By RTC Disabled
ErP Ready Disabled
Serial Port Configuration
Serial Port [Enabled]
This item allows user to enable/disable Serial Port (COM).
[Disabled] Disables configuration.
[Enabled] Change Settings appear under [Enabled]. Select an optimal
setting for Super IO device.
Change Settings [IO=3F8h; IRQ=4]
Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4]
[IO=2E8h; IRQ=3]