Asus ESC1000 G2 User Manual

Page 53

Advertising
background image

ASUS ESC1000 G2

3-5

2.

Chassis Fan control setting (3-pin CHAFAN_SEL)
These jumpers allow you to switch for fan pin selection. The CHAFAN_SEL jumper is for

the front fans and rear fans control. Set to pins 1–2 when using 3-pin fans or pins 2–3

when using 4-pin fans.

If you use a 4-pin fan but set the jumper to pin 1-2, the fan you installed may not work.

If you use a 3-pin fan but set the jumper for a 4-pin fan, the fan control will not work and

the fan you installed will always run at full speed.

®

Advertising