Asus ESC1000 G2 - Manual (Page 169)

ASUS ESC1000 G2 6-15
6.3.4 EPU
EPU is an energy-processing utility that provides several power-saving modes. When set
to the Auto Mode, the system automatically changes its power-saving mode based on the
current system condition.
You can also configure the system settings such as CPU frequency, GPU frequency, vCore
Voltage, and Fan Control to customize a power-saving mode.
Launching EPU
To launch EPU, click Tool > EPU on the AI Suite II main menu bar.
*• Select From EPU Installation to show the CO2 that has been reduced since you
installed EPU.
*• Select From the Last Reset to show the total CO2 that has been reduced since you
click the Clear button .
• Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software configuration.
*Shifts between the
display of Total and
Current CO2 reduced
Displays the system properties of each mode
Displays the following
message if no VGA power
saving engine is detected.
Advanced settings for each mode
Multiple system
operating modes
The items lighting up
means power saving
engine is activated
Displays the amount of
CO2 reduced
Displays the
current CPU power