2 quick start, 1 part 1: installing the switch, Chapter 2 - quick start – Asus GigaX1024iPlus User Manual

Page 15: 1 installing on a flat surface

Advertising
background image

6

Chapter 2 - Quick Start

ASUS GigaX 1024i+

2 Quick Start

This section provides the basic instructions to set up the GigaX 1024i+

environment. Refer also to the GigaX 1024i Installation Guide.

• Part 1 shows you how to install the GigaX 1024i+ on a flat surface

or on a rack.

• Part 2 provides instructions to set up the hardware.
• Part 3 shows you how to configure the basic settings on the GigaX

1024i+.

Before starting, obtain the following information from your network

administrator:
• IP address for the switch
• Default gateway for the network
• Network mask for this network

2.1 Part 1: Installing the switch

The switch can be installed either on a flat surface or on a rack.

2.1.1 Installing on a flat surface

The switch should be installed on a flat surface which can support the

weight of the switches and their accessories. Attach four rubber pads on

the four indented circles located at the bottom of the switch. See illustration

below.

1

2

3

4

Indented circles 1, 2, 3, & 4.

Attach rubber pads here.

Advertising