Asus GigaX1024iPlus - Manual (Page 38)

29
Chapter 4 - Configuration Management
ASUS GigaX 1024i+
• Show Port-Based VLAN: Select
Add a new VLAN to create a new
group, or select an existing group to
display on the following fields and
port icons:
•
Name: the group name.
• Group ID: this field requires you to
enter the Group ID when a new Port-
Based VLAN is created. The valid
Group ID is from 1 to 28.
•
Remove Group: Remove an existing Port-Based VLAN Group. This field
disappears in Port-Based VLAN Group creation page.
If you want the Port-Based VLAN group that you created to be effective,
you must go to VLAN Mode page to select Port-Based VLAN mode as
the VLAN Mode of these port members.
Click <
OK> to send the settings to the switch via the HTTP server. Click
< Reload> to refresh the settings. To permanently save the configuration,
go to the Save Configuration page, then click <Save>.
4.3.10 Default Port VLAN and CoS
This page includes some VLAN
tags' related field settings for each
port. These are as follows:
•
Port: Select the port to configure
• PVID: Port-based VLAN ID. Every
untagged packet received from this
port will be tagged with this VLAN
group ID
•
CoS (Class of Service) value:
Every untagged packet received from this port will be assigned to this CoS
in the VLAN tagged.
Click <
Modify> to change the content in the port list window. Click <OK>
to send the settings the switch via the HTTP server. Click < Reload> to
refresh the settings. To permanently save the configuration, go to the Save
Configuration page, then click <Save>.
Figure 27. Port-Based VLAN
Figure 28. Default Port VLAN & CoS