Asus GigaX1024iPlus - Manual (Page 44)

35
Chapter 4 - Configuration Management
ASUS GigaX 1024i+
password again for confirmation.
•
D y n a m i c V L A N : S p e c i f y t h e V L A N I D a s s i g n e d t o t h e
802.1x-authenticated clients.
Click <
Add> to create the new user. Click <Modify> when want to make
some modifications. Click < Remove> when you want to remove the
selected user. Click < OK> to save the settings. Click <Reload> to refresh
the settings.
4.5.3 RADIUS
In order to use external RADIUS
server, the following parameters are
required to be setup:
•
Authentication Server IP: The IP
address of the RADIUS server.
•
Authentication Server Port: The
port number that the RADIUS server
is listening to.
•
Authentication Server Key: The
key is used for communications between the GigaX and the RADIUS
server.
•
Confirm Authentication Key: Re-type the key for confirmation.
Click < OK> to save the settings. Click <Reload> to refresh the settings. To
permanently save the configuration, go to the Save Configuration page,
The VLAN of the RADIUS server connected to the switch must be the
same VLAN of the system management interface.
then click < Save>.
4.5.4 Port Security
Port security pages include port configuration, port status, and secure
MAC addresses function.
4.5.4.1 Port Configuration
This page is used to configure various Port Security parameters. The total
number of available secure MAC addresses on the switch is 1024. Users
can configure the port in the following fields:
Figure 37. Radius