Asus GigaX1024iPlus - Manual (Page 32)

23
Chapter 4 - Configuration Management
ASUS GigaX 1024i+
The monitor port can not belong to any link aggregation group.
The monitor port can not operate as a normal switch
port. It does not switch packets or do address learning.
Only supports 8 egress ports to be mirrored, and the monitored
egress packets will be untag.
Click < OK> to send the new settings to the switch via the HTTP server.
Click to < Reload> to refresh the settings.
4.3.4 Static Multicast
This page can add multicast
addresses into the multicast table.
The switch can hold up to 127
multicast entries. All the ports in
the group will forward the specified
multicast packets to other ports in
the group.
•
Show Group: Select Add a new
Group to enter a new entry, or select
an existing group address to display.
•
MAC Address: Selects the multicast address
• VLAN: Selects the vlan group
Click < OK> to save any changes made. Click <Reload> to refresh the
settings.
4.3.5 IGMP Snooping
The IGMP snooping function can be
turned on or off. This helps reduce
the multicast traffics on the network.
When turned on, the switch snoops
the IGMP packets and puts the new
group into the multicast table. How-
ever, if the static entries occupy all
256 spaces, the IGMP snoop does
not work normally. The switch only
allows 256-layer 2 multicast group.
Figure 20. Static multicast
Figure 21. IGMP Snooping