Asus GigaX1024iPlus - Manual (Page 39)

30
Chapter 4 - Configuration Management
ASUS GigaX 1024i+
4.4 SNMP
Simple Network Management Protocol (SNMP) is used to manage the
network. You may use the SNMP configuration page to enable or disable
the SNMP support.
To provide more secure management and access control, SNMPv3 is
supported. SNMP has the following configuration parameters:
4.4.1 Community Table
You can enter different community
names and specify a write-access
privilege to the community by
checking the checkbox. Click
< OK> to save the configuration or
< Reload> to refresh the page.
4.4.2 Host Table
This page links the host IP address
to the community name that is
entered in Community Table page.
Type an IP address and select the
community name from the drop-
down list. Click < OK> to save the
configuration or < Reload> to refresh
the page.
4.4.3 Trap Setting
By setting the trap destination IP
addresses and community names,
you can enable SNMP trap function
to send trap packets in different
versions (v1 or v2c). Click < OK> to
save the configuration or < Reload>
to refresh the page.
Figure 29. Community Table
Figure 30. Host Table
Figure 31. Trap Setting