Asus GigaX1024iPlus - Manual (Page 21)

12
Chapter 3 - Using the Configuration Manager
ASUS GigaX 1024i+
3. Enter your username and password, and then click < OK> to enter
the Configuration Manager. When logging in for the first time, use the
following default settings:
Username: admin
Password: (no password)
The home page appears at every log in to the system.
Figure 9. IP setup
Figure 8. Home page
3.1.2 Setting up a new IP address
1. To set up a new IP address, click System --> IP Setup. Fill in the
IP address, the network mask and the default gateway, then click
<OK>. The IP setup screen appears after you click <OK>.
2. If your new address is different from the default, the browser can not
update the switch status window or retrieve any page. This is normal.
You have to retype the new IP address in the address/location box,
and press <Enter>. This will refresh your web page.
3. To enable authentication for Web access, click Administration on the
menu list, then select Enabled to start the password protection.