Asus GigaX1024iPlus - Manual (Page 35)

26
Chapter 4 - Configuration Management
ASUS GigaX 1024i+
To modify a MAC address
Select the MAC address you want to modify, then click on <Modify>.
To remove a MAC address
Select the MAC address you want to remove, then click <Remove>.
To query a MAC address
Enter the MAC address and the VLAN ID, then click < Query>. Your
query will be displayed in the address window.
To save the changes you have made on this page, click <
OK>. Click
< Reload> to refresh the settings. To permanently save the new
configuration, go to the Save Configuration page, then click <Save>.
4.3.9 VLAN
4.3.9.1 VLAN Mode
There are two VLAN modes in our
switch: (1) Port-Based VLAN, (2)
802.1Q Tagged VLAN. The switch
supports this on a per port basis
by setting the configuration in the
following fields:
a)
Port: Select the port to configure.
b) VLAN Mode
• 802.1Q Tagged VLAN: Forwarding decision follows the 802.1Q Tagged
VLAN.
• Port-Based VLAN: if a port is in Port-Based VLAN mode: 1) when
the port receives a tagged packet, the forwarding decision follows the
802.1Q Tagged VLAN; and 2) when it receives an untagged packet,
the forwarding decision follows the Port-Based VLAN.
Restrictions
• If a port is in Port-Based VLAN Mode, it cannot be a promiscuous port,
and cannot run 802.1x and IGMP snooping.
• Trunked members must in the same VLAN mode.
Figure 25. VLAN mode