Asus GigaX1024iPlus - Manual (Page 46)

37
Chapter 4 - Configuration Management
ASUS GigaX 1024i+
is no data traffic from the secure source MAC address for the specified
time period.
Select the corresponding port number and configure the port setting,
then click < Modify>. The content of the display window will update
automatically as you make the changes. Click < OK> to save the new
settings. Click < Reload> to refresh the settings. To save the configuration,
go to the Save Configuration page, then click <Save>.
4.5.4.2 Port Status
This page displays the port security
information of all ports. The security
information is as follows:
•
Port: Port number.
• Status:
a) NoOper: This indicates port
security of the port that is
configured to be disabled.
b) SecureUp: This indicates the port security is operational.
c) SecureDown: This indicates port security is not operational. This
happens when the port security is configured to be enabled but can
not be operational due to some reasons such as it conflicts with other
features.
d) Restrict: This indicates that the port security violation occurs when
the violation mode is ‘restrict’.
e) Shutdown: This indicates that the port is shutdown due to port
security violation when the violation mode is ‘shutdown’.
• Restart: Whether to restart the port in shutdown status (Yes/No).
• TotalMacAddrCount: The total numbers of current static and dynamic
secure MAC addresses.
•
StaticMacAddrCount: The total numbers of current static secure MAC
addresses.
•
ViolationCount: The total numbers of secure violation.
Port security status on the port is ‘ SecureDown’ when one of the following
situations occur:
• The port is link down.
Figure 39. Port Status