Xylem IMVS R01 Model VS Vertical Industrial Turbine Pumps User Manual
Page 2
2
Foreward
This manual provides instructions for the Installation, Operation, and Maintenance of the Goulds Water
Technology Turbine Pumps. This manual covers a standard product. For special options, supplemental
instructions are available. This manual must be read and understood before installation and start-up.
This instruction manual covers several different pump models. Most assembly, disassembly, and inspection
procedures are the same for all the pumps. However, where there are differences, these differences will be
noted within the manual. The design, materials, and workmanship incorporated in the construction of the pumps
makes them capable of giving long, trouble-free service. The life and satisfactory service of any mechanical unit,
however, is enhanced and extended by correct application, proper installation, periodic inspection, condition
monitoring and careful maintenance. This instruction manual was prepared to assist operators in understanding
the construction and the correct methods of installing, operating, and maintaining these pumps.
The information contained in this book is intended to assist operating personnel by providing information on the
characteristics of the purchased equipment. It does not relieve the user of their responsibility of using accepted
engineering practices in the installation, operation, and maintenance of this equipment.
Goulds Water Technology shall not be liable for physical injury, damage, or delays caused by a failure to
observe the instructions for installation, operation and maintenance contained in this manual.
Warranty is valid only when genuine Goulds Water Technology parts are used.
Use of the equipment on a service other than stated in the order will nullify the warranty, unless written approval
is obtained in advance from Goulds Water Technology.
For information or questions not covered in this manual, contact Goulds Water Technology at (806) 743-5700.
THIS MANUAL EXPLAINS :
• Proper Installation
• Pump Overhaul
• Start-up Procedures
• Trouble Shooting
• Operation Procedures • Ordering Spare or Repair Parts
• Routine Maintenance
Pump Model Number:
Pump Serial Number:
Control Model Number:
Dealer:
Dealer Phone No.:
Date of Purchase:
Installation:
Current Readings at Startup:
1 Ш
3 Ш L1-2 L2-3 L3-1
Amps: Amps:
Volts: Volts: