Xylem handylab pH 12 - Manual (Page 57)

handylab pH 12 What to do if...
57 ba75368e04 01/2011
Obviously incor-
rect
measured values
Instrument does
not react to key-
stroke
Display
to
Probe symbol
flashes
Message
StoFull
Cause Remedy
pH electrode:
– pH electrode unsuitable – Use suitable electrode
– Temperature difference
between buffer and test
sample too high
– Adjust temperature of buffers
or test samples
– Measurement procedure not
suitable
– Follow special procedure
Cause Remedy
– Operating condition
undefined or EMC load
unallowed
– Processor reset:
Press the <CAL> and
<ON/OFF> keys at the same
time and release them again.
The software version is
displayed.
Cause Remedy
– Time-out of the interface – Check the instrument that is
connected
Cause Remedy
– Calibration interval expired – Recalibrate the measuring
system
Cause Remedy
– All memory locations are full – Output data storage and clear
data storage