YSI DIQ/S 182-PR System 182 - Manual (Page 129)

System 182 What to do if ...
9 - 5 ba76024e01 02/2012
Operating sequence in
case 2
1 Connect the IQ sensor.
2 Change to the measured value display with
m
. The
component database is updated. The following display
appears (example):
3 Select the required option with
w
and confirm with
g
.
– If Sensor neu aufnehmen was selected, the system
changes directly to the measured value display. As soon as
the IQ sensor is ready for operation, it delivers a measured
value.
– If Sensor als Ersatz zuweisen was selected, a list with the
assignable sensors or inactive datasets appears.
4 Select the required sensor with
w
and confirm with
g
. The
system changes to the measured value display. The IQ sensor
takes over all settings of the inactive dataset. As soon as the
IQ sensor is ready for operation, it delivers a measured value.