YSI DIQ/S 182-PR System 182 - Manual (Page 134)

Technical data System 182
10 - 4 ba76024e01 02/2012
Terminals
Cable glands
PROFIBUS connection 9-pin SUB-D socket on the top of the enclosure, compatible with
Phoenix connector (IP 67).
EMC product and
system characteristics
Note
Any combination of the DIQ/S 182-PR with IQ S
ENSOR N ET products in
a user-specific system achieves the listed EMC characteristics.
Instrument safety
Terminal type Screw-type terminal strip, accessible by
opening the lid
Terminal ranges Solid wires:
Flexible wires:
0.2 ... 4.0 mm
2
AWG 24 ... 12
0.2 ... 2.5 mm
2
Suitable for cable
diameter 4.5 ... 10 mm or 7 ... 13 mm
EN 61326 EMC requirements for electrical resources
for control technology and laboratory use
– Resources for industrial areas, intended
for indispensable operation
– Interference emission limits for
resources of class B
System lightning
protection Extended protective characteristics as
opposed to EN 61326
FCC, class A
Applicable norms – EN 61010-1
– UL 3111-1
– CAN/CSA C22.2 No. 1010.1