YSI DIQ/S 182-PR System 182 - Manual (Page 22)

Installation System 182
3 - 8 ba76024e01 02/2012
Stacking the
MIQ modules
Fig. 3-4 Stacking the MIQ modules (variant 1)
Fig. 3-5 Closing the enclosure (variant 1)
7 Attach the prepared Universal Transmitter to the lid of the
MIQ module. At the same time, ensure that the two clips on the
Universal Transmitter click into place in the lid of the
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-3).
8 Close the lid of the Universal Transmitter and fix it with the two
countersunk screws (pos. 7 in Fig. 3-5).
MIQ module
DIQ/S 182-PR
7
MIQ module
DIQ/S 182-PR