YSI DIQ/S 182-PR System 182 - Manual (Page 20)

Installation System 182
3 - 6 ba76024e01 02/2012
3.4.2 Variant 1: Stack expansion forwards
Preparing the stack
mounting
Fig. 3-1 Preparing MIQ modules for stack mounting (variant 1)
Mounting the contact
base
Fig. 3-2 Mounting the contact base (variant 1)
Note
Only use the plastic tapping screws supplied for attaching the contact
base. They ensure the correct fit.
1 Remove the covers from the drilled mounting holes (pos. 1 and
3 in Fig. 3-1).
2 Remove the contact cover (pos. 2).
3 Pull off the adhesive label (pos. 4).
1 3
2 4
For stack mounting remove label
and install contact carrier
MIQ module DIQ/S 182-PR
7
5
6
DIQ/S 182-PR