YSI DIQ/S 182-PR System 182 User Manual
Page 29
Advertising
System 182
Installation
3 - 15
ba76024e01
02/2012
Fig. 3-13 Example: SENSORNET connection
Note
The complete assignment of the terminal strip is shown in section 3.12.
6
Connect the cable ends to the terminal strip. At the same time,
look out for the designations of the terminals (red / shield /
green).
7
Tighten the coupling ring (pos. 3 in Fig. 3-12).
8
Close the enclosure.
SNCIQ(/UG)
or SACIQ
red
green
X3
X2
X1
SENSORNET 1
RED
SHIELD
GREEN
Terminal
designation:
Filler stranded wire (SNCIQ...)
or black (SACIQ)
Advertising