Mounting the universal transmitter in the panel – YSI DIQ/S 182-PR System 182 User Manual
Page 37
Advertising
System 182
Installation
3 - 23
ba76024e01
02/2012
Mounting the Universal
Transmitter in the panel
Fig. 3-20 Mounting the Universal Transmitter in the panel
1
Insert the Universal Transmitter in the panel aperture from the
front.
2
Slightly unscrew the screws (pos. 2 and 3) of the two angle
brackets (pos. 1 in Fig. 3-20), but do not remove them.
3
Push in the two angle brackets - as shown in Fig. 3-20 - into
the lateral guides of the Universal Transmitter up to the stop.
4
Tighten the screws (pos. 2).
5
Screw in the screws (pos. 3) until the screws rest snugly
against the panel.
For sta
ck m
oun
tin
g re
move
lab
el
and
insta
ll con
tact carrier
1
2
3
3
2
Advertising