YSI DIQ/S 182-PR System 182 - Manual (Page 48)

Installation System 182
3 - 34 ba76024e01 02/2012
Fig. 3-28 Prepared 24 V AC/DC line.
Connecting the 24 V AC/
DC line
Fig. 3-29 Inserting the 24V AC/DC line
ca. 45 mm
wire 1
wire 2
4 Open the enclosure of the Universal Transmitter.
5 Screw a cable gland (pos. 1 in Fig. 3-29) with sealing ring (pos.
2) into the enclosure below the 24 V AC/DC connection.
6 Loosen the coupling ring (pos. 3).
7 Feed the 24 V AC/DC line through the cable gland into the
enclosure. When doing so bend the flexible divider (pos. 4) to
the right.
1
3
2