Using telnet – Extron Electronics SME 100 User Guide User Manual
Page 129

Using Telnet
Follow the procedure below to run Telnet.
NOTE: To activate and run Telnet in Microsoft
®
Windows
®
7, select
Start
> Help and Support
or see the "Windows 7 Help and How-to"
documentation available online.
1.
From the desktop, select
Start > Run
.
2.
The Run window appears. In the
Open
field, type
telnet
and click
OK
(see figure 98).
Figure 98.
Run Program Window
3.
The Telnet application appears. At the telnet prompt, type
open
followed by the IP
address of the SME 100 and the port number (default port is 23). Then press <Enter>.
See figure 99 for an example.
Microsoft Telnet> open 10.13.193.140 23
Connecting To 10.13.193.140...
Figure 99.
Telnet Open Command
4.
The Telnet application is connected to the SME 100 when the window displays the
copyright message (see figure 100). SIS commands can now be sent to the SME 100.
Figure 100.
Telnet Connected to SME 100
SME 100 • Remote Communication and Control
123