Extron Electronics SME 100 User Guide User Manual

Page 137

Advertising
background image

X11$

=

IP address:

xxx.xxx.xxx.xxx

Leading zeros are optional and are suppressed in returned values.
Factory default IP address:

192.168.254.254

Factory default gateway IP address:

0.0.0.0

Factory default DNS server IP address:

0.0.0.0

Factory default multicast IP address:

239.199.188.138

Valid multicast IP addresses:

225.0.0.0

through

239.255.255.255

X11*

=

Hardware MAC address:

00-05-A6-xx-xx-xx

X11(

=

Subnet mask:

xxx.xxx.xxx.xxx

Leading zeros are optional and are suppressed in returned values.
Factory default subnet mask:

255.255.0.0

X12@

=

Verbose / response mode

NOTE: If tagged responses are enabled, all commands will return the

constant string and the data, similar to the response received when
setting a value. Example: the command E CN } returns Ipn • X11@ ]

as a response.

0 = Clear / none (default for telnet connections)
1 = Verbose mode (default for RS-232 host control)
2 = Tagged responses for queries
3 = Verbose mode and tagged responses for queries

X12%

=

Baud rate: 300, 600, 1200, 1800, 2400, 4800, 9600 (default), 19200, 38400,
57600, 115200

X12^

=

Parity:

Odd, Even, None (default), Mark, Space

Only use the

first letter.

X12&

=

Data bits: 7, 8 (default)

X12*

=

Stop bits: 1 (default), 2

X12(

=

Port type
0 = RS-232 (default)

X13)

=

Flow control:

Software, None (default)

Only use the

first letter.

X13!

=

Data pacing (specified in milliseconds (ms) between bytes): 0 through 1000

Default = 0 ms

For host ports, this value is ignored and will always return 0.

X13#

=

Password (up to 12 characters)

All readable characters are permitted except "/", "\", "

|

", and "*".

No blank characters (spaces) can be used in the password.

Passwords are case sensitive.

NOTES:

•

An administrator password must be set before assigning user
passwords. If an administrator password has not first been set, the

E14

error will be returned.

•

If the administrator password is removed, all user created profiles
and passwords are disabled.

SME 100 • Remote Communication and Control

131

Advertising