Extron Electronics SME 100 User Guide - Manual (Page 89)

Saving or recalling presets
1. Select an input using the input selection buttons (see item c on page 79;
Input Selection ).
2. Select a preset from the desired Preset drop-down menu.
3. Click the Recall button to recall the selected preset. Click the Save button to save the
selected preset.
NOTE: The preset is not saved or recalled if the Save or Recall button is not
clicked.
Renaming presets
1. Select an input using the input selection buttons (see item c on page 79;
Input Selection ).
2. Select a preset from the desired Preset drop-down menu.
3. Rename the preset as desired using the Rename Preset field (16 characters
maximum).
4. Click the Rename button to save the preset name. Clicking the Cancel button or
navigating to a different web page clears any changes that were made.
SME 100 • Web-based User Interface Operation 83