Extron Electronics SME 100 User Guide - Manual (Page 134)

X3( = Aspect ratio settings
1 = Fill (each input rate automatically fills the entire output raster; default)
2 = Follow (each input rate is displayed with its native aspect ratio)
X4) = Power save mode
0 = Power save mode disabled (default)
1 = Power save mode enabled (power save mode begins when no device
activity is detected for seven minutes)
X4@ = Audio delay (ms): 0 through 999
X5) = Maximum video bit rate (kbps): 200 through 10000 (default = 10000)
X5! = Video frame rate: 1 through 30 (default = 30)
X5@ = Stream mode
0 = Audio and video (default)
1 = Video
X5# = Bit rate control
0 = Variable Bit Rate (VBR; default)
1 = Constrained Variable Bit Rate (CVBR)
2 = Constant Bit Rate (CBR)
X5$ = Target video bit rate (kbps): 200 through 10000 (default = 1000)
X5* = GOP length: 1 through 30 (default = 30)
X5( = Streaming method
0 = Unicast RTP
3 = Multicast RTP over UDP
X6# = Streaming presets: 1 through 16 (default = 1)
X6$ = Audio bit rate (kbps): 16 through 384 (default = 384)
X6% = Audio sample rate
3 = 48 kHz (default)
SME 100 • Remote Communication and Control 128