Installing smp from the website – Extron Electronics SME 100 User Guide User Manual
Page 62
Installing SMP from the Website
If the SME 100 firmware was manually upgraded, the SMP web plugin must be downloaded
from the Extron website.
Use the following procedure to download the latest SMP player browser plugin.
1.
Go to
ch for the SME 100 product page.
2.
Select the
Downloads
tab, then select the
SMP Web Browser Plugin
link.
3.
Follow the instructions that appear on the screen.
4.
The file is saved onto the computer. Note the folder where the firmware file is saved.
5.
Navigate to the downloaded file, then double-click on it to launch the SMP installer.
6.
When the File Download dialog appears, click on
Run
to begin the installation (see
figure 40).
192.168.254.254
Figure 40.
SMP Web Browser Plugin Installer
Go to
on page 53 to complete the installation.
SME 100 • Web-based User Interface Operation
56