About the aspect ratio submenu, About the test pattern submenu, Section on – Extron Electronics SME 100 User Guide User Manual

Page 47: See the

Advertising
background image

About the Aspect Ratio Submenu

NOTES:

•

For information on setting the aspect ratio using the web-based user interface, see
the "

Encoder Settings Page

" section on page 88.

•

For information on setting the aspect ratio using SIS commands, see
"

Input aspect ratio

" on page 142 in the "

Command and Response Table for

SIS Commands

" section.

The

Aspect Ratio

submenu contains two configuration options.

•

When the

Aspect Ratio

submenu is set to

Fill

(default), the input signal fills the entire

output area. The

Horizontal Position

and

Vertical Position

is set to

0

,

0

. The

Horizontal Size

and

Vertical Size

is set to match the current output resolution.

•

When the

Aspect Ratio

submenu is set to

Follow

, the input signal fills the output

area using its native aspect ratio (3:2, 4:3, 5:3, 16:9).

About the Test Pattern Submenu

NOTES:

•

For information on selecting test patterns using the web-based user interface, see
the "

Encoder Settings Page

" section on page 88.

•

For information on selecting test patterns using SIS commands, see "

Streaming

presets

" on page 140 of the "

Command and Response Table for SIS

Commands

" section.

The following test patterns are available in this submenu. Visual representations of how the
test patterns appear when viewed on a display are shown in figure

22

on the next page.

•

Off

•

Ramp

•

Color Bars

•

Alternating Pixels

•

Pulse

•

White Field

•

Timestamp

•

Crop

•

Universal OSD

•

1.33 Aspect Ratio

•

Fine Crosshatch

•

1.78 Aspect Ratio

•

4x4 Crosshatch

•

1.85 Aspect Ratio

•

Grayscale (32 level)

•

2.35 Aspect Ratio

SME 100 • Front Panel Operation

41

Advertising