Extron Electronics SME 100 User Guide - Manual (Page 71)

2. The VLC media player appears. While playing a SME 100 stream (see the " Playing a
Stream Using VLC Media Player " section on page 158), from the Tools menu, select
Effects and Filters (see figure 54).
Figure 54. VLC media player — Effects and Filters
3. The Adjustments and Effects window appears. Click the Video Effects tab and under
the Basic tab, select the Image adjust check box (see figure 55). Image settings are
now able to be configured.
Figure 55. Adjustments and Effects Window
NOTE: If the SME 100 is not currently being used for live streaming, select the 32 level gray scale
test pattern (see About the Test Pattern Submenu on page 41) to assist with brightness and
contrast settings. All 32 levels should be visible. If the correct setting cannot be achieved with the
VLC controls, it may be necessary to return the VLC settings to their midrange levels, then adjust the
input specific settings on the SME 100 (see
Picture Control Menu on page 31).
SME 100 • Web-based User Interface Operation 65