Extron Electronics SME 100 User Guide - Manual (Page 72)

Using QuickTime Media Player
NOTES:
• This procedure only affects the image of streamed video that is played back on
QuickTime media player.
• Image settings should be changed while playing a SME 100 stream using
QuickTime media player. To play a stream using QuickTime media player, see the
"
Playing a Pull Stream Using QuickTime Media Player " section on page 162.
Use the following procedure to adjust the image settings of QuickTime media player.
1. Run QuickTime player. From the desktop, select Start > All Programs >
QuickTime > QuickTime Player .
2. The QuickTime media player appears. While playing a SME 100 stream (see the
"
Playing a Pull Stream Using QuickTime Media Player " section on page 162), from
the Window menu, select Show A/V Controls (see figure 56).
Figure 56. QuickTime Player Menu — Show A/V Controls
3. The A/V Controls window appears. Image settings can now be configured.
SME 100 • Web-based User Interface Operation 66