Managing files using ftp – Extron Electronics SME 100 User Guide User Manual
Page 79
Managing Files Using FTP
The SME 100 can act as an FTP file server. FTP provides an alternate method to accessing
the backup files of the SME 100. To manage files on the SME 100 using FTP:
1.
From the control PC, open a web browser.
2.
In the
Address
field, enter the IP address of the SME 100 using the following format,
ftp://[SME 100 IP address]
then press <Enter> (see figure 65).
Figure 65.
Enter an FTP Address (shown 192.168.254.254)
3.
A Log On As window appears. Enter a user name and password and click
Log On
(see figure 66). For information on user names and passwords, see the
"
" section on page 113.
NOTE: If no password is required to access the SME 100, enter a single space
character into the
Password
field.
Figure 66.
FTP
Log On As
Prompt
4.
The computer is now connected to the SME 100 (see figure 67). Files can be viewed,
copied, uploaded, and removed using this FTP window.
FTP root at 192.168.254.254
ftp://192.168.254.254
FTP root at 192.168.254.254
Figure 67.
FTP Window
SME 100 • Web-based User Interface Operation
73