Alpha Technologies AlphaGen PN-6x-T 7.5kW 48Vdc - Manual (Page 34)

34 042-288-B0-001, Rev. A2
Fig. 3-4, Pad Bolt Location, CE-3x2 5K-T
CAUTION!
Do not install the ignition battery until the enclosure is set in place in its permanent location.
3.0 Installation, continued
3.2
CE-3x2 5K-T Installation
3.2.1 CE-3x2 5K-T Transportation and Lifting
The generator weighs approximately 395 lbs. A safe means of transporting to the site,
and unloading the generator must be arranged. Do not transport, lift, or place the
generator on a surface unable to fully support its weight.
The generator is shipped bolted to a pallet. Remove the protective outer wrapping
material, and inspect the outside of the generator for shipping damage. Use a
forklift to place the unit (still bolted to its pallet) in the back of the transport vehicle
for delivery to the installation site. Once on-site, follow the procedure outlined on
the following pages to lift the enclosure from the shipping pallet and place it on the
concrete pad.