Atec Agilent-E5071C - Manual (Page 28)

28
General Information
Table 28. System bandwidth
Description General characteristics
IF bandwidth settings
Range 10 Hz to 500 kHz
Nominal settings are:
10, 15, 20, 30, 40, 50, 70, 100, 150, 200, 300, 400, 500, 700, 1 k,
1.5 k, 2 k, 3 k, 4 k, 5 k, 7 k, 10 k, 15 k, 20 k, 30 k, 40 k, 50 k, 70 k,
100 k, 150 k, 200 k, 300 k, 400 k, 500 kHz
Table 29. Front panel information
Description Typical General characteristics
RF connectors
Option 230/235/240/
245/260/265/280/285/
430/435/440/445/460/
465/480/485
Option 2D5/2K5/4D5/4K5 Type-N, female, 50 Ω
3.5 mm (male), 50 Ω nominal
Probe power
Connector 3 terminal connector x 2
Voltage & maximum
current +15 V ±2% (400 mA)
–12.6 V ±5% (300 mA)
(Combined load for both
probe connections)
Display
Type 10.4 in TFT color LCD
with touch screen
Resolution XGA (1024 x 768) 1
1. Valid pixels are 99.99% and more. Below 0.01% (approx. 30 points) of fixed points of black, blue,
green or red are not regarded as failure.