Atec Agilent-E5071C - Manual (Page 29)

29
Table 30. Rear panel information
Description Typical General characteristics
External trigger input connector
Type BNC, female
Input level Low threshold voltage: 0.5 V
High threshold voltage: 2.1 V
Input level range: 0 to + 5 V
Pulse width ≥ 2 μsec
Polarity Positive or negative
External trigger output connector
Type BNC, female
Maximum output current 50 mA
Output level Low level voltage: 0 V
High level voltage: 5 V
Pulse width 1 μsec
Polarity Positive or negative
External reference signal input connector
Type BNC, female
Input frequency 10 MHz ±10 ppm
Input level –3 to + 10 dBm
Internal reference signal output connector
Type BNC, female
Output frequency 10 MHz ±7 ppm
Signal type Sinewave
Output level 0 dBm ±3 dB into 50 Ω
Output impedance 50 Ω
Internal reference signal oven connector
Type BNC, female
Output frequency 10 MHz ±1 ppm
Output level 0 dBm minimum