Atec Agilent-E5071C - Manual (Page 41)

41
Cycle time for measurement completion 1, 2 (ms)
Table 40. Option 230/235/240/245/260/265/280/285/430/435/440/445/
460/465/480/485
Sweep mode: Stepped, analyzer display turned off with: DISP:ENAB OFF,
number of traces = 1, system error correction: ON
Number of Points
51 201 401 1601
Start 1 GHz, stop 1.2 GHz, 500 kHz IF bandwidth
Uncorrected 4.4 7.7 12 29
2-port cal 8.2 15 22 56
4-port cal 16 29 45 126
Start 1 GHz, stop 1.2 GHz, 100 kHz IF bandwidth
Uncorrected 4.8 9.2 15 41
2-port cal 9.0 18 28 80
4-port cal 18 35 56 163
Start 1 GHz, stop 1.2 GHz, 1 kHz IF bandwidth
Uncorrected 54 202 397 1563
2-port cal 107 401 792 3125
4-port cal 213 800 1581 6247
Start 100 kHz, stop 3 GHz, 500 kHz IF bandwidth
Uncorrected 6.7 13 18 48
2-port cal 13 24 36 94
4-port cal 26 47 70 190
Start 100 kHz, stop 3 GHz, 100 kHz IF bandwidth
Uncorrected 7.1 14 22 60
2-port cal 14 27 42 119
4-port cal 27 53 82 237
Start 100 kHz, stop 3 GHz, 1 kHz IF bandwidth
Uncorrected 56 206 404 1583
2-port cal 112 410 805 3163
4-port cal 222 818 1608 6324
1. Supplemental performance data.
2. Measured with fi rmware version A.09.30.