Atec Agilent-E5071C - Manual (Page 31)

31
Description Typical General characteristics
Line power 2
Frequency 47 Hz to 63 Hz
Voltage 90 to 132 VAC, or 198 to
264 VAC (automatically
switched)
VA max 350 VA max.
Power Consumption
Option 230/235/240/245/260/265/280/285
Option 430/435/440/445/460/465/480/485
Option 2D5/2K5
Option 4D5/4K5
130 W (SPD)
155 W (SPD)
160 W (SPD)
185 W (SPD)
Description Specifi cation General characteristics
AUX input connector
Type BNC, female x 2
Input range ±1 V or ±10 V selectable
Accuracy 1 % + 1 mV for ±1 V input
1 % + 10 mV for ±10 V input
Table 33. LXI compliance
Description General characteristics
Class C (only applies to units that are shipped with
fi rmware revision A.08.00 or later)
1. USB Test and Measurement Class (TMC) interface that communicates over USB, complying with
the IEEE 488.1 and IEEE 488.2 standards.
2. A third-wire ground is required.
Table 32. Rear panel information (continued)